The module is an Arduino-based Bezier curve smooth random CV generator with track and Hold via the trigger input and provides smooth random complex waveforms.

It can be easily modified / reprogrammed using the Download website and a USB cable.

It offers the following hardware features:

– Pre-soldered SMD Parts: Perfect DIY project for beginners.
– Panel Design by bkrsmdesign
– TRIG in: Track and Hold
– Eurorack power cable included

Changes from the original design:

PWM -> Analog conversion by active Steiner LPF (fg=500Hz) instead of passive RC network
Unipolar output changed from 0/+5V to 0/+10V
Additional bipolar output +/-10V
Additional inverted bipolar output +/-10V

_______________________________________________

DIY Info:
The assembly of the module is simple and suitable for beginners. The kit comes with SMD parts already soldered.

Panel + PCB Kit
You get the pre-soldered SMD PCB and the front panel. You would then have to take care of the appropriate microcontroller and the other components (potentiometer, OLED, jacks, etc.) by yourself.
If you check the BOM that you can find on the module page and realize that you already have all the components with you, then this is an option for you.

Full Kit
You get ALL components, as well as microcontroller, SMD-PCB, display and the front panel. Euclidean firmware is pre-flashed.

Built Unit
You get a ready built unit. No need to assemble by your own. Firmware of your choice is pre-flashed.